TKIP employs a per-packet key, meaning that it dynamically generates a new 128-bit key for each packet and thus prevents the types of attacks that compromised WEP. WEP used a 64-bit or 128-bit encryption key that must be manually entered on wireless access points and devices and does not change. The WPA protocol implements the Temporal Key Integrity Protocol (TKIP). However, since the changes required in the wireless access points (APs) were more extensive than those needed on the network cards, most pre-2003 APs could not be upgraded to support WPA. WPA could be implemented through firmware upgrades on wireless network interface cards designed for WEP that began shipping as far back as 1999. The Wi-Fi Alliance intended WPA as an intermediate measure to take the place of WEP pending the availability of the full IEEE 802.11i standard. 5.7 Predictable Group Temporal Key (GTK).5.5 MS-CHAPv2 and lack of AAA server CN validation.4 EAP extensions under WPA and WPA2 Enterprise.3.1 Target users (authentication key distribution).Please ask the person who set the key or in general refer to the documentation of your wireless router to obtain the security key and other settings if required. If you have a computer with Windows XP connected to the same Wireless network as the one you are trying to connect your Philips Blu-ray player to, you can see the SSID & Security Type but not the Security Key. Note: These values are applicable only for this example. Then make a note of the following which for our example is: Once the Properties window opens, go to the Security Tab and make sure you have 'Show characters' checked to see the security key in clear text. Right click on the connected network (in our example it is PNFAVDEMO) and then click on Properties.ģ.

In our example we are connected to PNFAVDEMO.Ģ. Left click on the wireless icon in the notification area of the taskbar to see which Wireless Network you are connected to. If you have a computer running Windows 7 or Windows Vista connected to the same Wireless network as the one you are trying to connect your Philips Wifi Device to, use the following steps to find the required setup information.ġ. Where to find the wireless network name and password:

WEP/WPA Authentication Key: It is a security key (like a password) which is used by a wireless router to recognize and provide access to wireless capable devices connected to the router.

Your device supports the following security types - None, WEP, WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP) and WPA2-PSK (AES). Security Type (WEP/WPA Authentication Type): This is the encryption protocol set for the Wireless Router during its setup.SSID: This is the name with which the player or another computer identifies the wireless network.Before you connect your Philips Blu-ray player to a Wireless Network, you must know the following details about your Wireless Network:

How to find psk key